Shoulder sling is a common orthopedic support medical device used to support the upper limb and help limit shoulder and arm movement during recovery pathways. Although it is typically low-cost and non-powered, it is high-volume hospital equipment that directly affects patient comfort, safety, and throughput in settings such as emergency care, orthopedics, perioperative services, and rehabilitation.
Knee brace hinged is a wearable orthotic medical device designed to support and stabilize the knee joint using one or more mechanical hinges. In hospitals and clinics, it is commonly used to help limit or guide knee motion after injury or surgery, support weak or painful knees during rehabilitation, and standardize immobilization when short-term external stability is required.
Ankle foot orthosis AFO is a lower-limb brace designed to support the foot and ankle and influence alignment and movement during standing and walking. In hospitals and clinics, this medical device is often part of rehabilitation, neurology, orthopedics, pediatrics, and discharge planning—especially when safe mobility and fall-risk reduction are operational priorities.
Standing frame is a widely used piece of rehabilitation medical equipment designed to support an individual in an upright, weight-bearing position when independent standing is not safe or feasible. In hospitals, outpatient rehabilitation, long-term care, and community settings, this clinical device can be part of structured mobility programs, positioning plans, and functional activities—always under appropriate clinical oversight and according to local protocols.
Balance trainer board is a commonly used piece of rehabilitation medical equipment designed to challenge postural control in a controlled, repeatable way. In hospitals and clinics, it is typically used by physical therapy and occupational therapy teams to support balance training, proprioception work, and functional rehabilitation, often as part of fall-risk programs and recovery pathways after injury, surgery, or neurological events.
A **Continuous passive motion CPM machine** is a piece of **medical equipment** designed to move a patient’s joint through a controlled range of motion without active muscle effort from the patient. It is commonly seen in orthopedic and rehabilitation pathways where maintaining early motion is part of a broader care plan.
Traction table is specialized hospital equipment designed to position a patient and apply controlled traction (a pulling force) to a limb or body region during selected orthopedic procedures and, in some settings, musculoskeletal rehabilitation. By stabilizing the patient and enabling precise alignment and access, a Traction table can support fracture reduction, implant placement, imaging (such as fluoroscopy), and repeatable positioning with less manual handling by staff.
Cold therapy is widely used across surgical, orthopedic, sports medicine, and rehabilitation pathways, but in modern facilities it is increasingly delivered through a **Cold therapy unit** rather than improvised ice packs. A Cold therapy unit is a piece of **hospital equipment** designed to provide *controlled* cooling—often through circulating chilled water and a dedicated pad or wrap, sometimes combined with compression—to support comfort and swelling management after injury or procedures.
Hot pack hydrocollator systems are a staple of thermotherapy services in many rehabilitation and musculoskeletal care pathways. They are simple in concept—keeping reusable moist heat packs at a controlled temperature in a heated water tank—but they sit at the intersection of patient safety, infection prevention, facilities management, and biomedical engineering.
An **Ultrasound therapy unit** is a therapeutic medical device that delivers controlled ultrasound energy (sound waves above the range of human hearing) through a handheld applicator to support selected rehabilitation and clinical treatment goals. It is most often associated with physiotherapy and musculoskeletal rehabilitation, but it may also appear in pain management, sports medicine, and some wound-care workflows depending on local practice and regulatory indications.
A Neuromuscular electrical stimulation NMES unit is an active therapeutic medical device designed to deliver controlled electrical pulses through surface electrodes to stimulate peripheral nerves and generate muscle contractions. In hospitals and clinics, it is most commonly associated with rehabilitation medicine, physiotherapy, orthopedics, neurology, and (in some settings) early mobility or muscle maintenance programs where voluntary activation is limited.
A **Transcutaneous electrical nerve stimulation TENS unit** is a non-invasive medical device that delivers controlled electrical pulses through skin-applied electrodes to support pain management. In many care pathways, it is used as an adjunct modality—often alongside rehabilitation, physiotherapy, and multimodal analgesia—because it is portable, relatively simple to deploy, and typically does not require complex infrastructure.
A Dynamometer handgrip is a compact clinical device used to measure grip strength by recording the force generated when a person squeezes a handle. In hospitals and clinics, this simple piece of medical equipment can support rehabilitation workflows, functional assessment, and longitudinal monitoring because it produces a quick, objective reading that can be documented and compared over time.
Goniometer is a widely used medical device for measuring joint angles and range of motion (ROM). In hospitals, outpatient clinics, and rehabilitation settings, it supports objective documentation of mobility, functional limitations, and progress over time. Because it is relatively low-cost, portable, and easy to deploy, Goniometer is common hospital equipment across orthopedics, physiotherapy, occupational therapy, sports medicine, and multidisciplinary rehabilitation pathways.
Therapy mat table is a common piece of hospital equipment used in physiotherapy, occupational therapy, and rehabilitation settings. It provides a stable, padded working surface where patients can be positioned safely for therapeutic activities, mobility practice, and clinician-assisted techniques. Depending on the model, a Therapy mat table may be fixed-height or height-adjustable, and may include features such as casters, locking mechanisms, side supports, and accessory rails.